Factory Direct Sales 110V 100A Industrial Lead Battery Charger/NiCd Battery Charger

Product Description

Factory Direct Sales 110V 100A Industrial Lead Battery Charger/Nicd Battery Charger

 

Product Description

EverExceed offers highly reliable and rugged Thyristor Industrial Battery Charger solutions for all DC Power Supply applications.  The EverExceed uXcel Ultra redundancy charger (DC UPS) is a new type charger for battery. This charging system is made by two independent charging loops in parallel; it can carry out the redundancy charge function. This system is controlled by digital intelligent with multi charge mode, simple operation and reliability; there is no phase sequence requirement. The transformer is made by high strength paint copper; it can achieve H grade high temperature resistance and isolation, the power units are made by aluminum pole and high-power disc type thyristor units with high performance and reliability. Available in single and three phase up to 220kW, and using ultra rugged phase controlled technologies, this series is ideal for all industrial applications including substation battery systems and DC UPS.

Features:

• Redundant Operation: The uXcel ultra redundant charging system is structured by two independent charging loop in parallel. It can carry out the redundancy charge function without interrupting each other. Both chargers operate by sharing load respectively between them which makes the life cycle long. Redundant charger ensures the continuous back up in case of emergency.
• High Reliability and High MTBF: Robust and unique design allows the charger to continuously operate at full load at a 40°C ambient temperature. Natural ventilation and cooling are available on most of the range. Precise adjustable temperature compensation.
• Versatile constant voltage and constant current charging modes.
• Enhanced Robustness - Mechanical design to withstand vertical and horizontal acceleration stress up to 0.5g as standard.
• Leading Technology - Phase-controlled Thyristor technology. The embedded micro-computer controller processes signals 10 times faster than standard analog methods.
• Flexible maintenance and Reduced MTTR - The design make it easy for front-access to all vital modules of the charger.
• Long design life up to 20+ years - system design life up to 20+ years in continuous operation under the condition of appropriate maintenance.
• Isolation transformer.
  • Multilingual digital graphic display with embedded event log.
  • Full compatibility with lead-acid and nickel- cadmium batteries, sealed or vented.
• Large LCD display- User-friendly operation with large LCD display, touch screen optional with the choices of 8 languages made to order.
• Smart Communication and Remote Monitoring- Through isolated RS232, RS485, and Ethernet. Full data logging.

Technical Data:

Nominal Voltage	12V	24V	48V	110V	220V	400V
Nominal current	25-1500A	25-1500A	25-1500A	16-1500A	16-1500A	16-1000A
Input supply	Single phase 120V/220V/230V/240V,three phase 208V/380V/400V/415V/480V
Input voltage/Frequency tolerance	± 10%, 50/60Hz ± 5%
Output voltage	1.8-18V	3.6-36V	7.2-72V	16.5-165V	33-330V	60-600V
Voltage ripple	<2% specified full load and without battery connected
Static voltage regulation	± 1% for 0-100% load variation, ± 10% AC input voltage variation and 5% AC input frequency variation
Dynamic voltage	5% for load variation of 10% to 100% to 10%
Current regulation	1%
Protection	Input circuit breaker, Charger output fuse/Circuit breaker*, Charger current limit, Dual battery limit, AC surge supression*, Short circuit protection, Reverse battery polarity protection, Phase lost protection*
Alarms	Charger Fail, DC High, Under/Over Voltage Trip, Earth Fault*, Low Electrolyte, Battery Disconnected*, Battery Over Temperature*, Blown Fuse*, Common Alarm Relay, Common Alarm Buzzer (All alarms are user programmable)
Metering	Charger Voltage, Charger Current, Load Voltage, Load Current, Battery Temperature*, Battery Capacity Ratio (Meter accuracy 1%)
Options	DC Voltage Regulator, TCP/IP adaptor, Triphase control and shot, Cabinet lamp Temperature and humidity controller, DC distribution board
Physical	Well mount on free standing powder coated metal cabinet (Dimensions depend on charger output rating and associated battery requirements)
Environmental	-10 to 50C, up to 95% humidity
Operating attitude (m)	3000 (without dreating)
Communication Interface	RS232/RS485 Modbus, TCP/IP Ethernet (optional)
DC Meter Disply (Optional)	For display the voltage and current of charger on the panel
MTBF/MTTR	100000 hours/ 4hours
Efficiency	80-93% depending on nominal voltage and power rating
Temperature compensation	Programmable 3-6 mV/Cell/C
Audible noise	<60 dB
Limp home feature	Continuous operation in the event of control failure
Revert to factory settings	Reinstates all original factory settings
System	SCR full-bridge, Intelligence charging management, fast acting fuse

Application:

• Oil & gas offshore & onshore
• Refining petro chemicals
• Telecom
• Transportation (Rail & Aeronautic)
• Power generation, transmission & distribution

 

Why us?
Reasons you would prefer to buy this power supply products from us
Service	RMA(24/7 pre-sales and after-sales support),OEM,ODM
Quality	Highly reliable quality guaranteed by Varta production equipment, German technology, European raw materials
Warranty	Standard 2 years, 5+ years upon request
Price	Competitive factory Price! Cut down the cost you paid to the middle man
Professional	Founded in 1985, 30+ years battery manufacturing experience
Production capacity	3,500,000KVAh per year
Reliable	Two R&D centers; Three major production bases; Global 500+ dealers/ agents; Global 100+ offices; Business coverage 65+ countries around the world

 

Shipping & Payment
Payment	T/T,  L/C , Cash, Western Union etc.(flexible payment term can be discussed)
Port	Normally Shenzhen China (any sea port upon request)
Delivery	By sea/air/trian/truck transportation
Delivery time	Normally 4 weeks ex factory excluding shipping.
Packing:	Pack in carton box then pallet (wooden box)

FAQ

1. Are u a manufacturer?

we are EverExceed Industrial Co., Ltd. Our group company manufactures different kinds of goods. We have a self-owned factory with advanced production lines to manufacture batteries and assemble all-in-one energy storage systems for residential and commercial energy storage solutions.

2. How long is the warranty?
1-year warranty, and after one year we can provide spare parts as per your order.

3. How can we reach your factory?
our Factory locates in Shenzhen city, you can take the train and reach Shenzhen station, or you can take a flight reaching Shenzhen or Guangzhou Airport. We will arrange the pickup.
 
4. How long is the delivery time?
Usually, it depends on your products and the QTY, the delivery time varies from 3 days to 90 days.
 
5. How to pay?
You can pay to our company account directly with the PI provided by us. We accept TT and L/C.
 
6. What are the delivery terms?
We can arrange the delivery by sea, by air, and by express carriers, Such as DHL, TNT, UPS, FedEx, etc. FOB, CFR, and CIF are all OK for us. And the nearest port is Qingdao Port.